The paint can be removed in several ways:
chemical
mechanical
thermal
The thermal cleaning method is most often used when there is a need to clean the metal or wooden surface from the old paint. For this method, the building is indispensable.
When working with this hairdryer, a metal spatula is also necessary. The paint is heated and then easily cleaned with a spatula. By the way, now they often began to dismantle structures, usually before this is consulted with a specialist.
It is very important when working with a similar hairdryer to use gloves that can protect their hands from hot air. In addition, it is necessary to remove the hair that it is accidentally not to burn it. It should be remembered that the construction hair dryer is able to give out a very high temperature.
If there is a need to cleanse a large area, do not warm up the entire surface at the same time, since even the heated surface cools very quickly. The paint should be heated only in one small area, and after that it is immediately cleaned. After one section is cleaned, you can take the cleaning of the next and so to the complete cleansing of the surface from the old layer of paint.
Instead of a hairdryer, you can use a burner. The work with a burner is done in approximately the same, but it requires much more attention and accuracy.